...set not to cut bass, check there are no effects on and that the XPQ is off. If you still have the problem how sure are you there is no bass coming from the mixer? Have you tried it with another amp? ...
Question about Fender Music
...bass amp with a similar problem last week: the problem is related to a loose connection on the PCB board (likely). A bass amp is a rough place for circuitry: the low rumble and power shake a bass amp ...
...bass you need speakers designed to carry low frequencies (40 - 400 hz); mid-ranges and tweeters don't cut it. Set your instrument volume on the guitar at 70 - 90 % to get the most signal from the ...
Question about Schecter Music
...bass, played through the same amp, same settings. what I did to one bass i did to the other. played with battery in, played with battery out. the other bass lost low end without the battery, but upon ...
After installation, the treble strings are much louder than the bass strings Try adjusting with the EQ settings on the amp... boost the bass and trim the highs.
...amp by reducing the bass, however most amps will cut all the bass and not what you want. Another way is a filter designed to cutt bass or low sounds. However your best bet is to use a Graphic ...
Question about Fender Music
...bass knob way up) when I hit a hard low E, the amp pops once and the hums and makes some kind of descending cracle noise. turn it off and back on and its fine again. If I am gentle on the low E its ...
amp into an input that is not designed for powered signals. Try the splitter or an old fashioned AB box. Safe and a cool trick. You can also use a stereo chorus pedal and let the signal chorus between
...set controls for bass boost and turn off the treble but there is only so much power available. HINT: If you are using speakers smaller than 15 inch, that will limit the bass as well. Use larger ...
Question about Bass Music
Bass. Simple set-up, 1 volume, 1 tone knob. Turn guitar and amp volume to "10", I get nothing. Other bass works fine so its not the amp or cable. Any ideas? Broken cable inside, possibly at the output
87 questions posted
Usually answered in minutes!
192 Questions
108 Questions
85 Questions
69 Questions