Royal 85X Shredder "paper shreds few" Questions

...few sheets of paper with shredder lubricant (basically clean mineral oil) to oil the blades and it should be good to go again. Just be careful cleaning that cutting head. I've donated many drops of ...

few pieces of paper, and it just stopped. The over heating light was not on If the motor will not run, then probably there's paper clogged in the shredder. Turn over the shredder, after unplugging the

.however, try putting some lightweight shredder oil on a sheet of paper and then shred the paper with the oil on it...do this a few times to get oil into the cutting blades then see if that has helped

...blades through the top portion, the paper get drenched with oil and will not feed in. Plz try a few sheets or a thicker paper to push through. It may just be that simple. Good luck. Plz N' Thnx, ...

shreds of paper. When I did this, the entire works fell out of the case and all of the wires disconnected from the 3-way switch. Can you look in yours and describe how the wires are connected to the 8

...few sheets of paper. clicked off. Have power at outlet. No damage to cord or connections. No auto reset of internal overload protection, amount of paper shredded far too few to trip overload. No ...

few pieces of paper to remove any excess oil from the cutters. The alternative method requires streaming oil onto a piece of paper. Do not soak the sheet in oil, but cover it evenly from edge to edge.

...few sheets of paper to remove any excess oil. The other, and perhaps most common, way to oil your paper shredder is illustrated in the image above. Simply spread a small amount of shredder oil onto a ...

...few papers shredded, but more paper is blocking the machine. Take care, because this thing can also shred your fingers. Remove the plug from the outlet and try to remove the paper under the rolls. Us ...