Mitsubishi WD-60735 Projection Television "tv timed" Questions

TV doen't turn on There was a power outage at the house the other day, no one home. Since that time cannot get the TV on, by removing power to the unit for a period of time, can turn on and get a ...

I have a Mitsubishi WD-52327. The TV turns on and stays on for 30 sec to 3 minutes. Then the TV shuts off, no picture, no audio and status indicator flashes red 3 short times and then one long red ...

status indicator flashes 3 short times, then one long red flash TV comes on stays on for approx 30 sec to 2 minutes. Then picture goes off, no audio and status indicator flashes 3 short times and then

auto power down the tv powers down after 1min. and in yellow says there is an air flow blockage have you tried cleaning the air filter? Has same problem a couple of times. Took out the light box and ...

i was watching tv and the tv cut off and the red lamp light came on does it need a new bulb? Lamp light lit that means lamp is dead and time to replace it. If lamp has not been replaced in 2-3 years ...

TV Won't power on We just installed the brand new lamp and the TV was working. We were playing with the settings (contrast, tint, etc) and the tv all of a sudden froze up and shut down. When we try to

Lamp failure in WD-52525 Bought tv with dim lamp, went out after 20 hours. Replaced lamp and worked for 250 hours or so, but took 15-20 seconds to warm up. Lamp light comes on but lamp still looks new

v chip codes I have a used tv with a v chip lock and I have no manual to reset and can't even watch the tv due to the lock LauriJo... From the back of my Mitsubishi Owners Manual, Appendix A ...

Area around TV is clear, nothing is blocking TV or air flow. When we use the TV we frequently get this message: The TV will shut off in one minute. Check to see if air flow is blocked. Happening more ...

TV taking a long time to initially turn on after it has been setting. The timer light will flash green for about a minute than the set will turn on. Change the TV Energy Mode to "Fast Power On" in the