2000 GMC Jimmy "gear 1" Questions

...shifter stuck in 3rd gear goes in 1 and 2 but nut n r or p so it wont start? xGot a 96 gmc jimmy auto shifter stuck in 3rd gear goes in 1 and 2 but nut n r or p so it wont start? check yr gear ...

...light, etc but my gear wont shift can i get soem help please push the gear lever to the last position that is to 1/2/ and relase the lever back to the park and then you will be able to relase the ...

no 1st or 4th gear My check engine light came on in my 1997 Jimmy for over three months, I had no 1, 3 gears. I replaced the ignition wires cost of about $400.00. Sovled problems

...gear some times doesn't work ,it takes 40 sec to get in ,what it is that please? low pressure in trasmission 1= our trany oil is to old 2= the pump in the trany is going try and aditif that gonna ...

...1/2 shims? inspect fly wheel good could have bad ring gear. check torque convertor bolts they are tigth. with starter bolted up NO SHIMS push out pinion gear and check clearance at flywheel teeth . ...

...1-2nd gear works only when i put the column shifter in thoese gears ...but when i shift it into drive and over drive right when it goes to shift into 3rd it pegs out rpms fr a second then idles down ...

...gear. slow take off in drive, its like a standard taking off in 3rd until i hit about 50 km/h.then its fine. also overdrive doesnt work at hwy speeds. transmission works fine if i manual shift ...

...1 or 2 and I have no gear push it up to 3 rd and it goes in gear and works like IT should 3rd or Over Drive now They say It Is the transmisson I have took It to another dealer they do not know other ...

gear apply circuit (servo assembly or 1-2 accumulator). Double check by using the pressure gauge and watch for a big drop when the PCM commands 2nd gear. Worst case: poor line pressure rise. 1-2 Shift

1 gear it will go and second works and so does drive after i have shifted it my self I am sorry but i know this symptom on this exact transmission and u are going to need an overhaul. my1994 gmc jimmy