Canon PIXMA MP210 Photo All-In-One Printer "blinking 0" Questions

Canon MP!!0 shows "COVER OPEN" and red light alarm blinks. ¿How to fix it? Make sure that the top of the printer that you lift to change the ink catridges is correctly closed.

printer wont recognize new ink cartridges .door open'' error message and an orange light blinks, even though no door appears to be open. Please help!...On the memory controller board (the unit

...blinking "E / 3" message. I do not see how to get into the area where the string fell other than to take apart the whole machine, and I fear that repair from a professional shop would cost more than ...

Blinking alarm light won't go off and printer inop. Power off and all check made, disconnected from compomputer. Went inop right after printing. In cartridridges and cassette moves freely and ...

...blinking Follow these steps since E5 means cartridges are not properly installed i.e. if you have not changed the cartridges prior to this point. If you have replaced the cartridges, then remove them ...

orange light is flashing 7 times, but printer ,is locked. Ink tanks do not centre when lid is opened. Probably your waste ink counter. Should be cleaned or replaced before resetting but usually you ...

Hello - My Canon Pixma iP2000 won't print anymore as I get a dialogue box advising me that the ink absorber is full. How do I remedy this? Heather Knittel [email protected] 1) With the front ...

...blinking #2 then P then 0. I have tried unplugging it I have tried pushing the reset button and nothing seems to work. No buttons on the printer are working except the power button Press Stop/Reset ...

...blinking . How do i FIX? Dr.s' office...help!! Canon MP750, MP760, MP780, MP830 The Unset mistake: ##341. Maintenance jet waste ink capacity full ##342. Cleaning absorption waste ink capacity full ...