...send each fax: 1)Hit the Fax button, then the Menu button. 2)Press the < and > buttons to scroll until you reach TX Settings. Hit OK. 3)Use the < and > buttons to scroll until you reach TX REPORT. ...
...ok to delete, menu to get out). Worse, after a couple of these, the memory is mixed up. So, when you want to send a Fax, it will say "memory full" even though the memory is empty. You then have to ...
Question about Canon PIXMA Office Equipment & Supplies
...send international fax to France. I can hear the fax number being dialed ok, but no connection after 12 rings. Calling fax number from phone hooked up through mp530 connects ok! I also lowered the ...
Send or Copy you get dark lines, but when you receive a fax or print from a PC it looks OK? If so, this is usually caused by a dirty document feed glass. Get a rag and some alcohol. Open the upper lid
...OK I FINALLY FIGURED THE SOLUTION FOR THIS MAJOR PROBLEM ON THE MP830 Here's our / your situation nightmare - the screen says 40 or say in my case 100% memory full and there is NO way you can fax ...
OK . Send another fax to verify that the ECM is enabled or disabled. Check the link bellow for a detail of all fax error codes: http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpu02549&cc=us&lc=en
Question about Canon PIXMA Office Equipment & Supplies
...OK. Off Does not print a fax confirmation report when you send and receive faxes successfully. This is the default setting. On Fax Send Prints a fax confirmation report for every fax you send. Fax On ...
...OK. Off Does not print a fax confirmation report when you send and receive faxes successfully. This is the default setting. On Fax Send Prints a fax confirmation report for every fax you send. On Fax ...
...ok i am planning to buy it, so it really not a problem. i need to know that do i need to have computer on while sending and receiving fax? do i need to scan a page before sending a fax? can i just ...
send or recieve faxes the fax report prints out and gives error codes. These are Error 282, 388, 421, and 233. Can you tell me what these codes mean? Hi, I have mentioned the Description for the error
2,559 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,594 Questions
1,302 Questions
1,216 Questions