Whirlpool LSB6200KQ Top Load Washer "bangs end cycle" Questions

noise on the final spin. It also wouldn't end the spin cycle at the end of the 30min wash the banging noise while in the spin cycle will more than likey be worn shock absorbers and will need replacing

...end of cycle. My washer is 2 years old now. It still washes fine with no leaks. At the end of the cycle in stops with a loud bang and it appears to have moved a little bit. I don't think it would ...

...end of the final spin cycle. I'm sure this is probably an easy thing to diagnose, but I really just don't know where to start. again it is a kenmore front loader. please balance your washer and use ...

end of each cycle I bang the washing machine top and it advances to the next cycle. This doesn't happen all the time but for every cycle, but always after the first. It's as if the bang or pushing the

...cycle in the front bottom of my machine and banging/thumping as it cycles through, especially towards the end. It doesn't appear to be a balance issue. Is this worth repairing or should I just buy ...

end of spin cycle the tub makes loud banging noise continues until the tub stop spinning It sounds like the drive block may be stripped out. To check it, you will need to remove the agitator to see if

...end of the spin cycle which are very loud. I checked and the machine is level. It does this even without cloths in the drum. I removed the agitator and the drive block doesn't appear to be worn. What ...

Kenmore 20 Porcelain Plus Refrigerator. Model number 8740911 makes banging noise when the cooling cycle ends. Quite loud. Refrigerator works fine. Any ideas? Make sure the fridge is level back to ...

...end of cycle then will not open door and makes loud banging noise which makes cold water pipes knock and pushes cold water out of upstairs tap try to put more clothes but not to much it wont banging. ...

...end of the spin cycle (during slow-down). Every other cycle works fine. Could this be a brake problem? With the lid open, set the cycle to spin and press the lid switch button with a pen. Wait until ...