Whirlpool Gold Duet GHW9400P 3.8 Cu. Ft. Front-Loading Washer "front load lint trap" Questions

...front load wash I hve a whirlpool duet front load washer and it is starting to smell moldy...i have already ran a load of bleach to no avail. where would the lint trap be if it had one? If it doens't ...

front bottom panel, cleaned out the lint as per the machine user manual, and it works fine for a few loads. But then it happens again. When we check the lint trap, it is almost clean, with very little

...front loader duet dryer that takes a long time to dry the clothes, it is about 3 years old Check the lint trap and the vent. If the vent is clogged or crushed in anyway then replace it with a new ...

lint trap is in a wall drain behind the washer so it is not easy to inspect. The washing machine has a fault that is supposed to recognize this but overflowing is always the method of notification. At

...front loader that will not drain properly because of the extra lint from a rug. I have unclogged the pump and ran the Rinse/spin cycle about 30 times to only get about a handful of lint after each ...

...flashed F 70 but my booklet does not tell me what it means. unplug it and clean out ALL lint the lint sensor will trigger this code,start at lint trap,blower motor, and all the way to the outside ...

...trap to make sure that it is clean after every load? Also the lint vent to the outside may be clogged and will not let the dryer vent like it should. This is dangerous. So check and replace if

...lint screen? Thanks. there s a"button trap" located on the side of your pump assy, behind the lower acess panel ( youll need to remove 3 torx 20 screws from the from bottom of machine ) after emoving ...

...load it won't empty - is there anything I can do, need to look at? Need to have a look at your pump and if it has a trap get a bucket and open it to clean it out. If not being eight years old I would ...

does the felt like pad belong in the lint trap? no that sounds like a fabric sheet.....