...consul is hinged from the top. Remove the two screws at the base of the consul ( at the front or the back) and pull the consul toward you then flip the consul back. You will find two gold colored ...
Question about Kenmore Washing Machines
trying to get consule off washer model no. 110.15942401 cannot get consule off washing machine model no. 110.15942401 remove the 2 screws - remove the end caps, and remove the clips using a ...
...to remove the front of the cabinet off. There are three places where the screws holding the top consule are located. Both bottom corners, both bottom corners but hidden by plastic end caps that ...
...consul on and flip it back. remove the two gold color spring clips under the consul and lean the cabinet forward to take the cabinet off. Your problem can be spotted easily now. Check your pump, it's ...
3Ftopic%3D67.0&feature=player_embedded#t=15 Be aware the screws that hold the the top consul in place might be different than shown. There are 3 different setups to remove the screws on the consul
...remove the consul and I notice that the small piece of plastic joigning the arm and the right cable of the transmission was broken. Is it possible to get this small piece of plastic ? Yes from a auto ...
...remove the two screws that hold the consul on, flip it back and pop out the clips (gold color on each side) to remove the cabinet. Look for the pump at the bottom front and remove the two clips and ...
...remove the consul based on the age and where the screws are, and as well there are 3 distinctly different lid switch assemblies. But the video should get you there. ...
Question about Kenmore Washing Machines
...remove screws to the consul, and there are 3 different styles of lid switches. You'll see as you progress. The principles are the same. http://www.youtube.com/watch?v=fC8SY3cU1Yc Thank you for using ...
1,616 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
429 Questions
