Question about Mitsubishi WD Televison & Video
...lamp light co tv will not power on steady red light stays on Inspect the lamp first to see if shattered--set has a self check feature also: Mitsubishi TV troubleshooting Here's something that ...
...light at timer flashes. After a long time it goes out, but when you power up then red flashes again. Press and hold the "Device" and "Menu" for 5 seconds and see what code comes up....... 12 No error ...
...I started to take the lamp out and now the indicator light is flashing orange. The "LAMP" LED light indicator is on or flashing.The tv projection lamp life are ended.Tv require a new projection
...lamp light not status should blink-I have suggestions but want you to try the self check first--if set has been unplugged plug it up and turn on and when it fails: Mitsubishi ...
Question about Mitsubishi WD Televison & Video
...light blinks 3 times, this is an indication that there's a problem with the lamp. The lamp may need a replacement. If you replace the lamp, but get the same problem, check the inverter board. If ...
Question about Mitsubishi WD Televison & Video
light indicator usually indicates its time to replace the lamp.Heres the lamp you would need http://www.discount-merchant.com/Mitsubhishi-915P027010-915P027A10-Replacement-p/mitsubishi-915p027010-lamp
...light 3 times and one long red. Replace the Lamp P/N 915PO20010 if it has never been replaced. Mats Electronics has them for $99.00 1-800-628-1118 Once the status light blinks 3 times, this is an ...
Lamp Light Red - No Screen Image When we turned on the TV, the lamp light turned on a constant red. The lamp light never even flashed green with a warning. The screen was black and there was no image ...
Question about Mitsubishi WD Televison & Video
...lamp light About two months ago I replaced the lamp and everything has been fine uptill now. when you turn the tv on the sounds comes on but now picture. Then after about a minute or two the TV shuts ...
Question about Mitsubishi WD Televison & Video
light ? changed lamp plugged tv back in and yellow status light blinking no power ? Mitsubishi TV troubleshooting Here's something that might also be useful. After you turn on the set, and get the
88 questions posted
Usually answered in minutes!
1,423 Questions
661 Questions
252 Questions
240 Questions
221 Questions