Sharp Aquos LC-42D62U 42 in. LCD HDTV "tv flashes short" Questions

TV wont start up, blue power icon flashes 3 long and 1 short flash repeatedly I own a Sharp model LC-60LE847U Aquos Quattron 3D television. Power light flashes 3long and 1short flash repeatedly. ...

TV front light flashes one long one short...wont power on what do I do?? Hello ! you probably have a short on the inverter boards check La1 or La2 power from the main board. That causes the main board

flashes. After disconnecting the side panel with flex ribbon cables from the other boards the TV now works but the side that is disconnected is darker and lines are present. I am wondering if there is

...TV will not power up! These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. ...

...short flashes repeatedly...performed a forced startup with channel down and volume up pressed...light stays on constant now but still no picture I would start by checking power supply voltages which ...

...Tv will work sometimes hours sometimes minutes then turn off and start the flashing green light. I have tried these some will work for a short period of time others didnt do anything. Is there ...

Phillips 51in tv rear projection power button blinking green tv will not come on. power button blinking green in a pattern. 6 blinks then1 blink. then will start over. Unpluged tv ,waited,still no ...

...flashes repeatedly from the power on indicator. I unplugged the TV held the power, channel down and volume up buttons then plug the TV back in. Now it comes on and has sound but no picture. The power ...

...TV worked for a short while and the same thing happened again. The board was replaced again. The TV worked for about 2 weeks and died again....same flashing sequence on turning on the TV last week. ...

TV wont turn on. No sound or backlight. The OPC and Power LED's flash in tandem but when the power button is pressed it wont turn on. There is a problem with the standby section of the power ...