Sharp Aquos LC-42D62U 42 in. LCD HDTV "element hdtv turns itself" Questions

...turns on vertical and horizontal pixels of the right shade at the right time to produce the image you see. One of the control elements for the vertical that controls the transmission of green light ...

Element HDTV 40 in. Model Number ELDFT404. Screen stays black when unit is turned on. I bought the TV on Black Friday in 2011 from Target. It has worked fine ever since I bought it. This morning I was

...element tv that won't turn back on..the red/blue light is not on either. It was working fine and when I shut it off the red/blue light went out also now I can't get it back on Tries tv unplug,replug ...

...element tv flx 2210 I can turn the tv on with the remote and I can "mute" the tv, but I can not do anything else. The tv also does not respond to the buttons on the tv itself- power off, ch, up/down. ...

The screen went black While watching a movie, the sound remained on, but the screen went black. I turned it off. Unplugged everything, plugged it all back in, same results. I called the cable company.

...of the time, it just shuts off again!!! An educated guess; this is the reaction of heat sensing elements in the main power supply or a component that has become heat sensitive. If you can arrange ...

red lead light is on when tv is plugged up, but wont turn on when i press the power button on the remote or the tv itself The power supply module may have died due to bad caps or other components, you

assembly instructions to hook up pc to tv This TV has a VGA port. This is the best option to use if you have a VGA port on the computer. (Note: this will not support any video with HDCP.) Turn off the

element tv with poor quality picture picture comes on fine, but after a few minutes the image may shake, disdcolor or have grainy lines running horizontally. if the tv is turned off and then back on ...

...itself, the failure could be in either part. If you have a digital camera or camcorder, turn it on so you can watch the LCD display and aim your remote at the lens of it and press and hold a button ...