Flashing errir E then 5 Flashing error E then 5 you need to reset your printer..... go to this link....... http://mallcom.wordpress.com/2007/10/23/canon-mp150-reset-codes/
Question about Canon PIXMA Office Equipment & Supplies
...have the same problem and the solution is...........this link... http://mallcom.wordpress.com/2007/10/23/canon-mp150-reset-codes/ or just press the colour or black button for at less 5
Question about Canon PIXMA Office Equipment & Supplies
After using printer to print on tshirt transfer it doesn't print properly. I don't know if I have reset it correctly. I can't find instruction book anywhere and am basically a technophobe To ...
Question about Canon PIXMA Office Equipment & Supplies
...a few steps that Canon gave me (remove cartridges, off & on, etc.) and I've tried pressing ok, and reset, but nothing works.....thanks! Same deal - was printing fine then keeps flashing E 3 tried ...
Question about Canon PIXMA Office Equipment & Supplies
...off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button. 2) When the Power LED is lit, press the Stop/Reset button two times while pressing
Question about Canon PIXMA Office Equipment & Supplies
...23 message with an alarm light that blinks. Printer will not print regardless of anything I try. I see nothing jammed in computer and do not know how to clear it? It means "Paper Feed Error" Check ...
E5 error how do reset the cannon pixma MP160 E5 error hi try to install a new driver from here ...
Question about Canon PIXMA Office Equipment & Supplies
reset counter absorber). 6. Turn off the printer and turn on again http://www.fixya.com/support/t5998845-error_code_6c10_mean Hope this helps. error [6C10] or light blinking 23 times is mean VALVE CAM
how to reset error 23 canon mp 198 Hello Error 23 is the Paper feed error, reset the printer and feed paper properly. Good Luck
...23-04 -PCL connection abnormality,failure of PCL connection is detected.Turn OFF/ON the power main switch.When an abnormality occurs,press the reset button following the LCD message,and turn the ...
2,715 questions posted
Usually answered in minutes!
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
1,216 Questions