Question about Canon PIXMA Office Equipment & Supplies
...MEAN AND HOW CAN I SORTED OUT? it means that the printers micro code has disabled the emty or nearly empty condition of this cartridge---or the contacts under the cartridge on the printhead are ...
Question about Canon PIXMA Office Equipment & Supplies
code 42 error definitely caused by loose flat cable or the ribon cable, check for any loose and attach it again. Also this could be a problem with the cable it could be the contact with is damaged and
Question about Canon PIXMA Office Equipment & Supplies
...code "E", then DO NOT click 'CANCEL PRINTING'. 4) Press and hold down 'Stop'/'Reset' button (triangle-circle icon) on your printer for 5-8 seconds. Printer should start printing. If you are able to ...
...code is related to the exposure lamp, Either the lamp is burnt or the fuse, a small device in the carriage of the lamp, is blown due to overheating. The reset is made with the machine switched on and ...
...code E000013-0001 this is explaining on the book e000013 -0001 The PLL lock isreleased because waste toner motor is locked up, etc.-0002 The micro switch employed to detect clogging of waste toner ...
...micro switch your machine will be ready Hi- The C-05 is a fuser code indicating that the machine is not warming up. The diagnstics detected that the temperature in the fuser is not increasing and it ...
Question about Canon PIXMA Office Equipment & Supplies
...Micro Door Switch. I am sure it will help you Forget the switch teory!!! this realy hapens in 22,35 and 45 cpm machines but not in this one. You have a faulty hexagonal motor or dirty mirrors in your ...
...code E-000013-0000 on a Canon Image Runner 5000 e-000013, it is all about waste toner. possibility : - waste toner case was detecred full. - The PLL lock is released because waste toner motor is ...
Question about Office Equipment & Supplies
...code is saying that there is a problem with the fuser section. Did you have a power surg resently? If so you may be able to reset it. If not you may have a blown fuser lamp or thermal fuse or the ...
Question about Konica Minolta Office Equipment & Supplies
...still present. --------------------------------------------------------------- Konica Minolta Error Codes & Solutions - http://www.kmcodes.com Drum, Transfer Belt and Fusing Unit Firmware Reset - ...
2,715 questions posted
Usually answered in minutes!
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
1,216 Questions
