...moved your projector to a different place, check if the existing light / ambient light in that room is making the image look dull / not so bright. If this is the case, try to reduce the ambient ...
Question about ViewSonic Office Equipment & Supplies
...ENTER. select BRIGHTNESS and press ENTER. using up and down arrow adjust the brightness. if still not get the desired brightness lamp should replaced. ...
Question about Mitsubishi Office Equipment & Supplies
...bright light is gone. I have to watched everything with no brightness or else this problem happens. My projector is basically unusable at this point Thanks for any help you guys can give. This unit ...
...not active. BRIGHT and CONTRAST How to enable? I can not make adjustment. hi, Go to menu and then select main. then select reset and execute it.After that try to adjust the brightness and contrast. ...
...not as bright with lights on? The Proxima DP5800 projector is a small format low powered projector at only 650 lumens (brightness measurement). It simply doesn't have enough lumens to cut through ...
Question about InFocus Office Equipment & Supplies
picture goes from bright to dim to bright again, what does this mean? Hello Dawn hi, try using a 1000watt UPS to regulate your mains power, if this does not solve the problem, lamp failure is imminent
Question about Office Equipment & Supplies
...with an Acer PD113 ? and How big will the image be? Not sure of the lumens or brightness of this model but in the dark it should be bright enough. Most projectors will do up to a 300" diagonal
...the brightness flickers intermittently. This is apparent on low and high brightness levels, does not stop even after half an hour or more of viewing, and has not changed even after reseating the ...
projector is working but intensity problem,, display is not good Have you changed the brightness setting or put the projector into eco mode. ? Also see what mode your dvd player is in (same on ...
Question about Panasonic Office Equipment & Supplies
...bright spot (which bleeds from top to bottom of the screen, about 1/5th of the width) is still there. so...it's not the lamp...but what else could it be? I have the exact same problem with my AE700. ...
103 questions posted
Usually answered in minutes!
237 Questions
232 Questions
180 Questions
101 Questions
105 Questions