Maytag Neptune FAV6800A Top Load Washer "lid" Questions

...plthrsn64 , You should open up a separate problem for this but I will post as a solution for the Lid Lock Issue. For the FAV6800AW that is you machine type correct? The "LO" console error is "Lid ...

I have a FAV6800AWW Maytag washer. The lid lock clicks several times when you try to start the wash cycle. The locked light never comes on and it just sits without starting. I disassembled the left ...

...for reference. Sears Parts Direct for reference. I feel you have lost signaling from the Left Hand Lid Lock for Lid is Open/ Lid is Closed. First check is to place a magnet over the Left Hand grey ...

why does my lid lock keep flashing? changed lid lock but having the same problem. There is a right lid lock and a left lid lock which did you change? The left lid lock is a lock and the reed switch ...

Water spray from lid I have water spraying from the back of the lid. There are 3 tubes providing water to the lid. The middle one looks like it is too high and partially hitting the lid instead of the

the locked light is on but I am able to open the lid. It will not start Hello barbarafreel, Your machine type is a FAV6800A correct? If so I would try to recycle 120VAC power to the machine. Pull the ...

...magnets or similar magnet on the left bumper of the machine and see if that will clear the the ?OP? lid open alarm, see pic attached. If that clears the alarm the lid magnet may have moved out of ...

...came home from college. They tried to put the front panel on, and broke the tips off of the two lid latches. Solenoids still operate. Now, when you start a cycle, the latches click a few times ...

...schematic of this machine the control board wants to see input from either the left or right side lid lock to signal the control board that the ?Lid Is Locked?. Can you select Spin only cycle and ...

...IS THIS MEAN od error code description from the Service Manual for the FAV6800A/FAV9800A; Open the Lid: The lid has not been opened for the last three completed cycles. If only it were that easy to ...