...Green wire is for ground... There should be a ground screw in the connector panel, but if not, be sure to securely attach the Green wire (ground) somewhere on the frame of the dryer. Be sure it makes ...
.... white to center screw green to cabinet..the green wire already attached to green screw should to taken off and either cut off or taped off it can be just connected back to center screw for future ...
Question about Whirlpool duet Washing Machines
...green wire from the back center of my washer needs to connect to.. the model of my washer is wfw8300sw04 .. This is the last piece for me to put together my washer. If there is a wire diagram you can ...
wire harness connections from the CCU are not broken or with wiresdetached, and that connector internal pins are visible.- Make sure all green wires (ground harness system) are not broken or detached.
...wire harness connections and still have the same problem how would you check which component has failed? motror/tach mcu ccu would it be safe to say the mcu? mcu is responsible for the f06 fault code ...
...green wire) at the motor board and possible slight oxidation at one other connetion of the black wire - using sand paper and screwdriver I've cleaned the contact together with the connector and tried ...
...green wire from the cabinet to a grounding location, such as a bare cold water pipe is just added safety. There might be something wrong inside the dryer, but to be safe, you should have the outlet ...
Question about LG Washing Machines
...green wire (ground) then I'm wrong. If the new switch has a green wire that would need to go where the original green wire went. And if metal with some kind of spring mounted "keeper" you should not ...
Question about Hotpoint Washing Machines
...green wire go Hi, on a 4 wire 50 amp dryer cord, you will have a white wire that goes to the silver connection on the plug, a black, and red wire that go to the 2 brass colored connections, and the ...
wire and Ground (GREEN or BARE COPPER) wire are terminated on the terminal block in the back of the dryer: - In a 4-wire configuration, these two wires are INDEPENDENT of each other and are terminated
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions
