Whirlpool Duet GHW9150P Front Load Washer "gets stuck" Questions

Whirlpool front loaded getting stuck in wash and rinse cycle Have a 6 year old front load Whirlpool washer. Towards the end of the wash cycle all lights start flashing on the board and the machine is ...

...gets stuck, "grease" mark going down the back. grinding sound when it does turn. cant figure out how to take the "axle" out to replace. where do i go from here? your bearings are shot your washer ...

Pause mode stuck Hello- How do I reset my machine to get the pause mode unstuck??? I have tried unplugging it and that didn't work. The control panel lights up, you can turn the dial to what cycle you

wfw9150ww00 My 3 year old, front loading washer (Whirlpool Duet WFW9150ww00) is stopping after the wash cycle is finished (Sometimes right after the first fill). I am getting error code F8E1. I have ...

There is a clanging noise as the washer spins, and sometimes it stops spinning. It sounds like there is something stuck in the washer between the basin where the clothes go and the outside of that ...

Control Locked My Control Locked light is on and I can't get it to go off. It is stuck on that setting and even when I change the cycle the cycle is still stuck on the last cycle that it washed on. I ...

Whilpool washer- my door is stuck locked. I don't have a smaller lower front panel to remove to unlock the door, my panel is one large piece from the bottom up and around the door. Any way to get the ...

If we don't turn off the main water supply valve after every use the machine fills up with water The solenoid is most likely stuck open. You may be able to get a new one from whoever sold you the ...