...error code will flash when the dispenser motor cannot be driven to its proper position. * It could have a mechanical failure in the linkage between the dispenser motor and the top of the dispenser. * ...
...error code Frigidaire frontloader From the frigidaire site. Error code - Fault condition E11 Fill time too long. E13 Water leak in tub or air leak in air bell. E14 Reed switch. E21 Water not pumping ...
Question about Frigidaire Washing Machines
...error code E5E. Also recently replaced door switch assembly. E5E IS FOR Communication problem. THERE IS 100 %WIRE SHORTING SOMEWHERE.PLEASE CHECK OUT. ALSO OTHER ERRORS Error code - Fault condition ...
...error code: Place the control into Diagnostic test Mode. Turn the program knob clockwise 9 clicks from the Start Position. The control will signal the last error code. Press and hold the Options and ...
...error code: Wake the machine by pressing any button Wait 5 seconds Press and hold the Start and Pause Cancel buttons simultaneously All LEDs will go blank and after a few seconds the control will ...
Question about Washing Machines
error message 130 came up and we have not been able to get it to go since. It appears your timer/main controller/CCU has failed in this instance. For replacement parts - head on over to PartSelect.com
...code Fault condition Check E11 Fill time to long. Refer to test (1). E13 Water leak in tub or air leak in air bell. Refer to test (2). E21 Water not pumping out fast enough. Refer to test (3). E23 ...
code F-24 E11 Fill time too long. Refer to test (1). E13 Water leak in tub or air leak in air bell. Refer to test (2). E21 Water not pumping out fast enough. Refer to test (3). E23 Drain pump relay on
1,828 questions posted
Usually answered in minutes!
200 Questions
88 Questions
87 Questions
45 Questions
22 Questions