...(user programming remains intact) 95 protection 99 Exit maintenance mode" I would use the 01 and reset everything. Otherwise you can go through the 91 parameter list till you find the counter. ...
Question about Brother MFC Office Equipment & Supplies
...reset fuser life ENTRY INTO THE MAINTENANCE MODE Press the [Menu] and [Start] keys. Next press the [/\] key four times to make the machine enter the maintenance mode. FAX models equipped with ...
Question about Brother MFC Office Equipment & Supplies
...reset the purge count to zero. 5) Press the Stop/Exit key to return to the initial stage of the maintenance mode. 6) Press the 9 key twice to return to the standby state. Solution #1 works perfectly ...
...reset and than 99 to get out of maintenance. If this corrects the problem then OK but you may have a failing thermister in the fuser. If the problem happens again then change the thermister. If the ...
Question about Brother MFC Office Equipment & Supplies
reset purge counter 1) Enter machine maintenance mode (on MFC240C all four photo/copy/fax/scan lights flash in maintenance mode). Care is needed in maintenance mode, otherwise critical settings may be
Question about Brother MFC Office Equipment & Supplies
...several times to get to the Purge item 4. enter 2, 7, 8 and 3 using arrow/set keys to reset the counter 5. press Stop/Exit key to go to root of maintenance mode 6. enter 9,9 to exit maintenance ...
Question about Brother MFC Office Equipment & Supplies
...the LCD Press the 2, 7, 8, and 3 keys in this order to reset the count Press Stop/Exit key to return to initial Maintenance mode Press the 9 key twice to exit and return to normal operation. Good ...
reset purge counter 1) Enter machine maintenance mode (on MFC240C all four photo/copy/fax/scan lights flash in maintenance mode). Care is needed in maintenance mode, otherwise critical settings may be
8, and 3 keys in this order to reset the purge count to zero. 5) Press the Stop/Exit key to return to the initial stage of the maintenance mode. 6) Press the 9 key twice to return to the standby state
Question about Brother MFC Office Equipment & Supplies
...maintenance mode. Your purge counter is now reset and you can now resume printing as normal. If however this has not cleared the error message I advise going through this guide again following the ...
1,189 questions posted
Usually answered in minutes!
1,135 Questions
743 Questions
623 Questions
406 Questions
381 Questions
