HP OfficeJet G55 All-In-One InkJet Printer "cleaning print head hewlett packard" Questions

...print head and the same problems occur. Rachael, My HP L7580 has been doing the same thing, and I've followed the same steps you describe above, with the same result. Have you resolved the issue? I'm ...

...cleaning process in there or what? Michael G So far the overspill opf black ink seems to have stopped. Do do this I dismantled the Hewlett Packard G55 by taking off the end panels, the back locking ...

cleaning. Also check the ink levels and make sure they are ok. White lines probably indicate damaged/worn out print heads. Very often it will be just as cheap to buy a new printer as get them replaced

Yellow & Magenta not printing Yellow & Magenta colors are not printed in papers in my hp t790 plotter. Can any one help please Both print heads are clogged, try to clean it manually if not ...

...print colour prints on my HP 2605DN the red ink is always missing although there is plenty of toner left. This problem started about a year ago and it got gradually worse. Now there is no red ink ...

When I try printing, some of the scrip is missing There is plenty of toner, could the print heads be clogged and if so, how do I clean them? If there are lines on the paper that are not printed the ...

...cleaning attempts and there is no improvements in the print then a new print head is required. Also try  - Removing the print head, run it under hot water for 2 mins, then let soak for 10 min. ...

I was printing on the HP4500 printer, when it stopped printing and said that I needed to replace the setup printheads. How long do the printheads last, do I need to clean them and put them back in or ...

replaced the color ink cartridge. The right indicator light (color) keeps blinking.no color printing available removed & cleaned service module --spittoon--rest printer by shut down-remove ...

print head cleaning utility. i've been trying to find the print head cleaning utility, and well.. i can't find it.. anyone can help me? i would like to try running it first before soaking my print ...