Question about HP LaserJet Office Equipment & Supplies
blank pages and it will not even print test pages etc Hello, I would need more information on the same. Is the printer printing blank pages, while printing configuration, internal test pages, or is it
...blank pages Does it print at all? Have you tried a demo print? menu->information->print demoIs it printing additional blank pages are all pages blank?The first thing to check would be the ...
print out a test page > If the test page is blank issue with printer > If the test page is not blank then try printing a doc from pc > If its still blank then uninstall and re install drivers
print blank pages i would try this hope this helps James Every so often? Sometimes if the printer is set to print on Legal sized paper (8.5" x 14") it will take an extra blank sheet if the sheet sizes
Question about HP LaserJet Office Equipment & Supplies
...blank pages. It just feeds pages the pages through without printing anything on each print job. I tried reinstalling the drivers, printing test pages, and I even changed the cartridge, but its not ...
page, prints 1 or more blank pages between the printed pages. At the end of the document prints several blank pages, sometimes enough to empy the paper tray. When printing a document with only 1 page,
Question about HP LaserJet Office Equipment & Supplies
...print blank pages in the middle of a print job. After that, other print jobs produced only blank pages. I replace the transfer kit but that did not fix the problem. This is usually the Transfer kit, ...
...blank pages - all cartridges are good & 1/2 to completely full Try printing a configuration page to see if that comes out. If it does then you might have a print driver problem. Also try printiing a ...
Question about HP LaserJet Office Equipment & Supplies
...print on the blank side of page 2, and all the rest will follow in sequence, with the correct sides up. Works every time. The print control is part of the Windows system, so your application should ...
blank. The printer may attempt to print even if the ink level is low or empty, but will unable to print anything on the page, causing it to come out blank. Remove the sealing tape from newly installed
1,256 questions posted
Usually answered in minutes!
1,429 Questions
724 Questions
663 Questions
593 Questions
492 Questions