I have an HP LaserJet 1022 (USB to Windows XP Pro SP2) that was working earlier this week, but now its printing blank pages. It just feeds pages the pages through without printing anything on each print job. I tried reinstalling the drivers, printing test pages, and I even changed the cartridge, but its not printing. It was printing a few days ago. Any ideas?
I had this same issue, are you able to print from the printer's internal test feature? If so try turning the power off for at least 10 seconds. This is just at temporary fix I am still looking for a permanent fix that does not involve replacing the printer.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You need to reinstall the printer driver.
First check which operating system is used with your product? After that download the software from Download Full Feature Software and Drivers. How to Uninstall the printer Software :- Follow the steps below to remove the hp LaserJet 1020 series software from the computer:
Disconnect the USB cable from the computer.
For the Windows Desktop, click Start , click Programs or All Programs , and then clickhp LaserJet xxxx series .
Click Uninstall hp LaserJet xxxx series .
Follow the messages on the screen to remove the software.
Reboot the computer when instructed.
1. Disconnect the USB cable from the computer. 2. For the Windows Desktop, click Start , click Crontrol panel, select add\remove(XP) or program future (VISTA). 3. Click Uninstall hp LaserJet xxxx series . 4. Follow the messages on the screen to remove the software. 5. Reboot the computer when instructed.
After restart install the printer driver and follow the screen instructed.
the manual tray is the is the one above the tray,
1-either your tray is set incorrectly must be set to Letter/Plain
priority is tray 2 not tray 1
tray one is the by-pass / manual
since this printer does not have a screen on it everything is setup through the PC.
print a configuration page and you will see all the settings
Laserjet 1022 printe supports printing through the Laserjet 6L drivers and its tested, please select the same USB port for the Laserjet 1022 printer which is selected for the Laserjet 6L printer and then try printing.