HP LaserJet 2300N Printer "straight cable configuration" Questions

...straight back) and hook the printer directly to the PC with a parallel cable. You can also order a new card (Part#J3113A) online, but it will take some time and needs to be configured after ...

configuration page. The firmware date code will be on the left hand side. Current firmware is 48.180.9. If the firmware is out of date, see the link posted below to download the firmware update. Chose

straight scoop for fixing your problem from the Canon website: Issue: Unable to print from the computer when an error message is displayed 1. Configure printer driver to correct port 2. Disconnect and

...configuration is right. Set the pages as your program allow. For example if you're using MS Word you can set the pages, by number, odds and even or collate. Check the order of your pages at your ...

...Cable is connected and it is turned on.... 1. install alien Symaptic Package Managerunder System, Administration. 2. Go to HTTP://www.canon.com, Support and get the 4 required Linux Drivers. ...

...straight in the in-feed slot. There is a hole on the right side of the in-feed slot. Make sure the edge of the media is aligned with the left side of this hole. Lower the roller levers on both sides ...

...configuration. I have most often tried connecting as WLAN Open System Authentication with WEP password Encryption Key, but have also tried Open System Authentication with no Encryption Key, and even ...

...cable into the wall outlet first and then into the back of the printer Earnest: Turn the unit on. The printer may display message "USE POWER BUTTON TO SHUTDOWN THE PRINTER" followed by "PRESS OK TO ...