...to change the date Hi here are the steps to change the date and time 1.Press Menu2. Use the < or > buttons to select System Setup and press the check button.3. Use the < or > buttons to select ...
...you can print out your printer's menu by doing the following: To print a menu map 1. Press (SELECT button) to open the menus. 2. Use (UP button) or (DOWN button) to scroll to INFORMATION, and then ...
please tell me how to configure ip address in printer 4350 Press Check mark (SELECT button) to open the menus. 2. Use (UP button) or (DOWN button) to scroll to CONFIGURE DEVICE menu, and then press ...
...the printer has diferente languche corean or some thing... how i can restart it Try this. BTW, the Button with the "Check Mark" is the Enter button on this. 1). Switched the printer off. 2). Press ...
...it: 1) Firstly, ensure that all printer cartridges and the drum are installed 2) Check the power button whether it is off or not. If ON then off it 3) Then hold the GREEN GO BUTTON 4) Now ON the ...
...printer ip I don't remember my 2015 printer ip address. how do i get that You can press the MENU button on the Laserjet, on the right hand side of the button to keep to pressing the right side of ...
...botton on the control panel for the printer. Scroll down to "Configure Device" and hit the check button. Scroll down to "Resets" and hit the check button. Scroll to "Reset Supplies" and hit the ...
Question about HP LaserJet Office Equipment & Supplies
...Another method is to use the printer's control panel: 1.Press the green check mark (Select) button. 2.Press the Up or Down arrow to scroll to CONFIGURE DEVICE menu and press the check mark ...
Question about HP LaserJet Office Equipment & Supplies
...smeaing issue: Set the Fuser Mode for the Envelope to High 1 or High 2. Press Select (check mark button), and scroll down to CONFIGURE DEVICE. Press Select, and scroll down to PRINT QUALITY. Press ...
...the power cable from backside of the printer and from wall outlet. Press and hold the Power button for 60 seconds. Connect the cable and turn ON the printer. Partial Reset Remove the power ...
176 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions