Canon BubbleJet i560 InkJet Printer "ink tank lights working" Questions

ink tank is full Dis-assemble and replace or clean the wastee ink absorbing pad. Rinse (lots of work) until it is very light grey. Dry and then re-install. Download and run the maintenance software to

...ink tank is empty * five flashes means the print head is not installed correctly or not installed or is defective (before buying a new print head always try the cleaning instructions at the end of ...

...ink is not leaking out the bottoms as this indicates a bad seal on the tank and it's a gonner. Close the printer cover and let it complete the automatic cleaning cycle. Print a test page: With the ...

...ink tank Hi The waste ink is in the inside of your printer you need to get at it to clean out, It may be all screwed down so you need to open all up or get a shop to do it for you. It not an easy job ...

...ink tank it either needs to be replaced or you need to reset the error code like this Try This 1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press ...

...ink tank is full. Try this ... Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA iP3000 above, 1. Turn off printer 2. Hold down Resume button and press Power button. 3. Keep ...

tank counter reset] (The indicator toggles between orange and green each time the Resume button is pressed.) 4) After selecting the function, press the Power button, and the green indicator will light

...to purchase a new machine as they are extremely difficult to change. HI, MY NAME IS VICKY, FROM INDIA. I HAVE CANON IP 100 AND GOT AN ERROR ON IT. FULL WASTE INK TANK. BUT I CAN NOT SOLVE THIS ...

ink tanks  I tried the tank full reset I flushed the ink jet unit with distilled water. I cleaned the large ink waste pads and flushed the ink collection unit under the printer frame after I took

ink tank is full. it won't print anything Could have a corrupt driver. Disconnect the printer or at least be sure it is turned off. I'd do both and when the CD software program asks you to connect the