Question about Lexmark T Office Equipment & Supplies
... I can only print from Tray 1 when I manually switch printing to Tray 1. check the paper type and the paper size from the printer menu, if it is ok then you will try to check the paper sensor on tray ...
Question about Lexmark T Office Equipment & Supplies
...switch to Tray 3 (bond). Need to Configure HP 4050 printer to prompt 'load paper' when tray 2 is empty. Both trays have letter size. You'll have to change the paper TYPE of tray 3 to a different type ...
Question about Lexmark T Office Equipment & Supplies
...paper tray bar not aligned correctly and the easy way is to switch trays 2 and 3 and see what happens. The type setting which is inputed at the printer if not matching the job will cause the paper to ...
...paper from Tray 2 Action: The 4100 will look at tray 1 first then tray 2 If tray 1 is empty it will pull from tray 2 if the papersize matches the job otherwise back to tray 1 and ask for the ...
Question about Lexmark T Office Equipment & Supplies
...paper sizes of Statement, A6, Custom, Any Custom and nothing else. Tray -1 gives me all the sizes. The tray does not have a custom or standard switch. Is there a way to do a factory reset? I just ran ...
...when paper in tray there is a switch at the paper try which is triggered by the paper when it is inserted at the tray check this switch it must be brocken or require cleaning the sensor of this ...
...paper from tray 2. Pls. suggest. The 4100 will look at tray 1 first then tray 2 If tray 1 is empty it will pull from tray 2 if the papersize matches the job otherwise back to tray 1 and ask for the ...
...switch is located on the tray that designates the appropriate paper size being used. I have had users accidentally move the switch from standard to legal and prompt an error that would not be reset ...
Question about Lexmark T Office Equipment & Supplies
...paper There is a "micro-switch" that should be triggered by the weight of paper, i.e., no paper in the tray triggers the switch, and the printer reports "tray empty". So, either the paper is not ...
...paper, it won't switch trays even if the same physical paper is in there. Go through the control panel on the front of the printer, or if it doesn't have one, you'll need to use the web interface to ...
208 questions posted
Usually answered in minutes!
139 Questions
129 Questions
130 Questions
122 Questions
41 Questions