20 Most Recent
Lexmark T642 Laser Printer Questions & Answers
T642 wont recognize tray 2 or duplex
You need to be sure you add the duplex unit and tray unit in the windows driver. The "device" tab will allow you to add the duplex and tray to the
printer.
Error message says: remove paper from standard
Make sure that the exit flag is moving freely. It sounds like it is stuck in the up position or popped out of place. The flag is located on the left side of the output bin and should be hanging down
927.03 service fan stalled
hello
This solution was tested for x 204. Get the right cover of the printer. See the fan. Fan connector is located to the card enters the socket. Socket located at the bottom part of the written 4R7. Install this part by removing the 4.7 ohm resistor. The problem is solved.
Lexmark t642 load mp feeder with letter
The reason that your printer is asking you to load paper into the MPF is that it doesn't think it has that size paper in tray 1 or 2. Make sure that the green paper guide in the paper tray that you want to print from is latched in the correct position. This guide tells the printer what size paper is in the tray. If you have it even slightly out of position you'll get this message.
Not finding what you are looking for?