20 Most Recent Lexmark T632 Laser Printer Questions & Answers

924 is an open thermister error. The thermistor controls when power is actually applied to the heating lamp on the fuser. I used to have this problem with other Lexmark models and was able to replace the thermister itself. The thermister is located on the top cover of the fuser. If you have a real Radio Shack near you they should have them. I believe that the temperature should be around 400F.

Lexmark T632... | Answered on May 08, 2015

T632 reset maintenance count: Press and hold down the "select" and "return" keys while powering on the printer, hold these buttons until the display reads " 80 Scheduled Maintenance, press the "go" to continue past this message and access the configuration menu. Press the menu button until the display reads "reset Maint Cnt" on the second line of the display and press the " select" button. the top line of the display should nnow read "reset maint cnt" and the second line will read "reset" and pressthe "selcect" button. this will reset the counter to exit out of the "configuration mode" cycle the power.

Lexmark T632... | Answered on Feb 05, 2015

need more info what is the error code?

Lexmark T632... | Answered on Feb 03, 2015

sticker at the back of the printer

Lexmark T632... | Answered on Feb 03, 2015

Try using 100gsm paper .. Also called German alabaster... Then it won't

Lexmark T632... | Answered on Feb 01, 2015

refill replacement chip is either bad or not place properly

Lexmark T632... | Answered on Dec 06, 2014

I would suggest you contact a certified Lexmark trained technician to replace the printhead or you may contact Lexmark Technical Support.

Lexmark T632... | Answered on Jul 21, 2014

Please ensure the power connector wires for the fuser are routed properly so as not to rub on the aluminum bar that is used during the duplex function.

Lexmark T632... | Answered on Mar 26, 2014

Please determine what size you are trying to print (A4, Letter, Legal, etc.). The printer is requesting A4 sized paper in the maunal paper feeder becuase either you selected manual feed or the setting for the default try (usually tray 1) is not set to the correct paper size. In your case, make sure the green slide adjustment on tray 1 is set to A4.

Lexmark T632... | Answered on Mar 26, 2014

try to look the description if it is for 220 or 110 and it is 100-220 its ok for both

Lexmark T632... | Answered on Mar 24, 2014


This error is cause by either having your output paper bin full of paper or the flag sensor out of alignment where the paper comes out of the top. Look at the top f the printer where the paper comes out and you should see a black plastic sensor flag, it should move freely. If it is stuck remove the top cover above it and try to free it so it can move. Below is a picture of the printer with the output sensor flag circled.


Lexmark T632... | Answered on Jan 06, 2014

Not finding what you are looking for?
Lexmark T632 Laser Printer Logo

161 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts


Level 3 Expert

4345 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

T Lexmark

  • T Lexmark

Most Popular Question

standard bin full

  • Office Equipment & Supplies