Lexmark T634n Laser Printer "redrive" Questions

jams, no print Lexmark T634 will jam in redrive. There is no image on drum or paper, and the fuser only gets warm, not hot. Fuser swapped to another printer and works fine there. Thinking one of the ...

...Support for further assistance. If you hear Squeaking from the rear of the unit it usually is the redrive. The redrive removes easily with two small screws near the bottom and to plastic thumb

...the gray panel off of the back to remove paper jam If you are looking to remove what is called the redrive, which is the back rollers of the printer do the following: 1. First remove the drop down ...

high frequency grinding type of noise. Thanks, Marvin You printer may need a maintenance kit or the redrive replaced

paper crunched up and jammed i n rear of printer I cant remove it. If this is constant, it may be caused by the fuser or the redrive assembly. I would suggest you contact Lexmark Technica Support.

...if you could try removing the paper from inside. If this doesn't help you might want to remove the redrive assembly (the back portion of the printer) which can be taken off by removing two little ...

...paer jam message generated by the fuser (hot thing in the back of printer) remove rear door and the redrive unit. ( two screws on back of printer and press in two levers on upper portion of back to ...

...under the heating element and I can't get it out remove the back cover, 2 screws holding the redrive (back) assembly.You will have access to the fuser, again held with 2 screws. Disconnect ...

...know when a page has exited the fuser... To check this you can remove the back door assy. On the redrive, (which is the part that the back door covers) there will be a gap .... if you shine a

...need removing take screw out of each side of top cover and remove carfully to get left cover off redrive has to be removed and screw top of frame undone and screw inside where toner