paper edge just creases up and stops.All other components seem to be working fine. Have removed cartridges, unpowered machine, and tried moving a folded envelope through the rollers left to right - no
Question about Lexmark X Office Equipment & Supplies
...needing cleaned. Take a small flashlight and examine every nook and cravice of the computer. You may find a piece of paper. Take a lint free cloth and clean inside the machine as well and then try
Question about Lexmark X Office Equipment & Supplies
paper face up or face down It depends on which FAX-machine you are using, since they're not all the same. Look for a small icon (like a piece of paper, with one corner folded-over) near the feed-tray,
...machine lexmark X6170 says error with cartrige 50c It insists there is a Cartridge problem on the Printer............ In this Case take out the Paper from the Paper Feed Tray........ Unplug the Power ...
Question about Lexmark X Office Equipment & Supplies
...folding white paper and no jams when folding 11 X 17 paper. Tech suggests it's a paper problem, but has no suggestions. Any thoughts? G Is this paper the same weight/thickness as the white paper? Are ...
Question about Konica Minolta Office Equipment & Supplies
...the machine with the short edge of the paper fed first so if the paper is turned the wrong way in the paper tray the machine will reject the fold command it should say on the paper type setting ...
...folding correctly. The paper is taken from the stack okay but it appears then to fold about 3 mm at an angle then a second fold of about 25 mm then throws the paper out of the bottom correctly. It ...
Question about Sharp Office Equipment & Supplies
paper from the machine at the fusing unit, you can see 8 pawls, it looks like a hook but in a flat design. They should be touching the heat roller ( each has a spring to make it flexible ). If one not
Question about Lexmark X Office Equipment & Supplies
...paper path ( you would have to stop it at every step to see at what point it gets folded) b)usually the fuser claws are the problem ( right before the exit the part that gets hot has some claws that ...
...paper stuck in the machine after clearing a paper jam. I found it by removing the paper tray and looking under the machine. I cleared it by removing the back cover. The small piece of paper was hard ...
1,500 questions posted
Usually answered in minutes!
1,487 Questions
1,277 Questions
961 Questions
741 Questions
552 Questions