compound as it helps quite a bit with the coolring. There are also a few resistors you need to replace. You can find out all about this is you just google stk392-120 replacement. Google is ur friends
Question about Samsung Televison & Video
...compound to them and simply install them... Be careful not to over heat the pins and don't be in any hurry.Now test the two 3.5a pico fuses and replace if necessary, as well as the 3.9 ohm resistors ...
...words are split by colors. Colors not converging. Performed alignment procedure and does not work to bring colors together. This problem originally started out as a sparatic problem and over a short ...
...words but our Akai TV started to have the red and blue colors overlap kind of like its in 3D also the picture seems to wave on the bottom and the top. From what I have read on the forums people with ...
...words, yet this is the best way to discribe the problem. If you try to adjust convergence with the flash focus, perfect focus, (depending on the make of your set) or by manual convergence and the ...
compound and apply a generous layer on the back of the new IC's before you install the new IC's. Also you should check around for overheated or cooked resistors around the area of the convergence IC's
words or picture scrolls by IF IT IS 53UWX10B: This model uses two convergence IC's----if 3 D one or both are bad. Most of the time this set uses either two of the STK-392-110 OR THE STK-392-150 CHIPS
...words and is leaving blury outlines around people If you try to adjust convergence with the flash focus, perfect focus, (depending on the make of your set) or by manual convergence and the lines will ...
723 questions posted
Usually answered in minutes!
1,061 Questions
920 Questions
867 Questions
724 Questions
779 Questions