...Mode is the button on the far left). The console will go completely blank. To enter a code: Select the first part of the code using the copy quantity buttons, followed by the ?Print? button, then the ...
...diagnostic mode How do you bring that up on the printer? Which buttons do you press To enter Test Selection mode from Customer mode and display the Test Selection screen: Select Information -> ...
Question about Xerox Office Equipment & Supplies
...Enter diagnostic mode To enter diagnostics: Power on Press 'Clear' > 'Exposure' > 'Clear' > 'Exposure' buttons within 4 seconds. All the lamps on the control panel will go out. Enter the ...
...enter into service/diagnostic mode and try to perform a test, the printer may come up with system error 79:04 (non-continuable generic error). When this occurs in diagnostic mode, it is not likely ...
Question about Xerox Office Equipment & Supplies
enter diagnostic mode and reset: Entering Diagnostic Mode: First of all... to enter the User Interface (UI) Diagnostic Mode: Turn on the power... then while holding down the '0' button, press 'Start'.
. select ENTER DIAGNOSTIC MODE press enter, WAIT 20 seconds before display shuts off and goes into diagnostic mode, go to function menu. then go to clear ISC fault and enter. ISC=ink stick count fault
Question about Xerox Office Equipment & Supplies
...mode of the Xerox Phaser 6500, if there is any. Could someone please help? To enter Service Diagnostics on Xerox Phaser 6500: 1.turn the printer off ; 2.press and hold both the Up and Down arrows and ...
Question about Xerox Office Equipment & Supplies
...ENTER", will be displayed "DIAGNOSTIC MODE XX.XX.XX S-MODE"Press "+" or "?" button until ?NV-RAM INITIAL? is displayedPress "ENTER" againAppear "TABLE 1" messagePress "ENTER" until "EXECUTING RESET" ...
...enter,go to star wheel lifter,press OK.. complete the mode..if fails remove star wheel are clean all gears refix again, do the diagnostic again..if you have manual that better to process the things.. ...
Enter Diagnostics and press the OK button. Entering Service Diagnostics by Rebooting the Printer (8400): 1. Turn the printer power OFF. 2. Press and hold the Back and Help buttons. 3. Turn the printer
23 questions posted
Usually answered in minutes!
534 Questions
436 Questions
284 Questions
267 Questions
262 Questions