...TIMER RESET option, then scroll right to enter - Confirm that it is OK to reset the lamp timer by hitting the OK button. - The on-screen menu should confirm the lamp was reset correctly You should ...
Question about Toshiba Office Equipment & Supplies
...reset the timer but the manual have NO instruction How to reset the bulb timer. Please Help The booklet that comes with a new lamp specifies the following for the TLP XD2000. While holding down ...
...the projector is ok , you only need to reset the timer of lamp and to reset the timer of the filter, menu-setting-advance-reset-the timer of the lamp menu-setting-advance-reset-the timer of the ...
Question about Sharp Office Equipment & Supplies
reset the timer, but the projector was working after lamp replaced, now it stopped working with the time over due and unable to reset it. on the timer shows 1917hs. Reset the lamp timer. 1,Connect the
reset lamp timer I have an Epson Powerlite 5350. I want to know how to reset the lamp timer. There is a "reset all" option, but that DOES NOT reset the lamp timer. Nothing in the manual says how to do
reset lamp timer replaced lamp but did not reset timer now lamp will not turn on and it will not reset timer make sure the bulb is pushed all the way in place and then when the door is fitted back on ...
Question about Sharp Office Equipment & Supplies
reset the timer after replace projector lamp- there are no screen. How to reset the timer? Reset the lamp timer. 1,Connect the power cord. 2,While simultaneously holding down "menu","enter" and "down"
reset timer You did not post model number of TV so try below method to reset lamp timer. Turn TV ON, Press and hold Volume minus button on TV and press Split/ Play button on remote for 6 seconds, lamp
...timer Reset the lamp timer. 1,Connect the power cord. 2,While simultaneously holding down "menu","enter" and "down" on the projector, press "standby/On" on the projector and keep all four buttons ...
...timer reset Have followed the manual, but timer not reset. the manual states:- "whileproj. is up and running, press and hold timer button on remote for 3seconds - operating time is displayed-OK, then ...
84 questions posted
Usually answered in minutes!
230 Questions
141 Questions
104 Questions
82 Questions
96 Questions