Canon NP 6551 Black and White Copier "paper jam finisher unit" Questions

paper jam under the fuser unit on a canon image runner 5070 Hello sir; I believe You have to detacth finisher unit then open the side door to reach the fusing unit see is there have jamming paper over

paper jam and message C570 - Call for service the copier had a paper jam and I do believe that I have removed the paper jam - now. But, the message is C570 Call for Service. The C570 is a ...

paper jam and located 2 misfeeds and pulled them out. Copier now says misfeed in finisher. Where is finisher located and how to handle misfeed? finisher is the unit attached to the copier on the left.

...paper then you may have a staple jam. To get the staple unit out: Open front door of finisher, Locate green turn wheel (this is horizontal in bottom left of finisher front door and is connected to ...

...otherwise go to replace paper exit senser on the machine or paper entrace senser on the finisher ( depend where got paper jam). Check your pick up finger of your heater roller it might be ...

...paper then you may have a staple jam. To get the staple unit out: Open front door of finisher, Locate green turn wheel (this is horizontal in bottom left of finisher front door and is connected to ...

paper jam Hi, I have a paper jam in my asf 100. the staple cartridges are stuck down and wont release. Can anyone help me with this please? Please try remove the staple cartridge (the copier power on)

plain paper jaming in fuser unit paper jam in fuser unit must be fuser unit, look for these signs : 1- upper roller damaged 2- does not have a "polished " finish 3-lower roller has ripples /waves on ...

...paper jam and dyspaly Duplex UNit-A1 or fixing Unit or Finisher code red light U HAVE TO DISASSEMBLE THE COPIER AND LOOK FOR PIECE OF PAPER WHICH 80% WILL IN THE FUSER SECTION.if all things fail then ...

...paper from the front of the unit. Turn off the HP product and turn it around so the back of the unit faces you. Disconnect the power cord from the back of the all-in-one. The power cord must be ...