Question about Canon Office Equipment & Supplies
HP 2600n Ironing transfer paper jammed around top roller Some ironing transfer paper was used in the HP 2600n printer and it has jammed around the top roller above the 4 print cartridges. Paper is ...
...iron-on transfer on my samsung clp 300 but now I have a paper jam. I tried to remove it but the paper got torn and now it looks like I would have to dismantle the whole printer to get the other piece ...
roller) you will see four wires going into that housing. Two are for the thermistor and the other two is for the fuse that is built into the housing. You would have to use a soldering iron to melt the
...iron , then pour the tonner 140 grams powder through it seal it with cello tape. It is ready for next 2500 copies.Enjoy. Like this three times possible to use the same cartridg . Then you have to ...
Question about Canon Office Equipment & Supplies
my printer prints pages with a thick black line at the bottom if older printer or well used printer (All laser printers if they have print quality issues - it is mostly either the toner or the fuser).
Question about Kyocera Mita Office Equipment & Supplies
...unit you can see two springs remove both ...registartion unit will come out ... clean the two rollers properly and refix it and check ..... if its not working replace the paper feed unit ..... ...
...percent of the time by the fuser. There is a solid aluminum roll and a silicon rubber ( pressure) roller in the fuser. The pressure roller either developes some flat spots from park ( non running) ...
Then, lift it straight up and out of the printer (be sure it is cooled off!). 4) Inspect the fuser rollers indside the fuser housing. More than likely, the rollers will have the contact paper wrapped
...iron on paper in the printer, and the paper got stuck. we think it melted to the rolls on the back of the printer, the oragane and black rollers. what do we do???? Oops...You need to remove the fuser ...
Question about Toshiba Office Equipment & Supplies
...The copier you have needs both developer and toner. The developer is iron fillings that are used to hold the toner on the mag roller of the developer unit. It gets worn out over time. Good ...
913 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions