Mitsubishi WD-52525 52" Rear Projection HDTV "reset button not work" Questions

...button or a corrupt e-prom, but lets try kicking this set in the head, Now these reset codes are model dependent so this code will not work for every set out there but this reset is for the WD-62525. ...

reset button with a stiff brush...now the green light won't stop blinking and won't power up...what are my options? I found this on the web .... might help ... dont know but it might be worth a try...

...reset button. I am unable to access any other device input such as a DVD player other than the cable 1 input jack I had this same exact problem with my WD-62627. I got mine to work by re-initialing ...

reset button will not reset the tv have tried unpluggng tv and then reset but nothing works. have had problems in the past resetting it sometimes. Anything I can do ? Here's how ...

...reset button but it just starts blinking green again.can you help me with this problem. if the light just constantly blicks green and doesnt stop. You will need the" V26 DM repair kit " which will ...

...reset button never worked. I unplugged the set for 30 seconds and re-plugged it back in. The light began blinking between 9 and 11 times, clicking like it was trying to turn on but would not and just ...

...reset button on the front of the set. The soft reset is with the original remote, and the set on hit menu, 1,2,3 enter. This will reset the set to the condition it was when new in the box, yes any ...

button doesn't work and causes TV to reset Beginning yesterday, each time I try to push the device (up/down) button on the TV remote the picture begins to be "jerky" and then after about 15 seconds of

...a system reset using the recessed button on the front panel. >>If that does not work, unplug the set and let it sit overnight SYSTEM RESET button with a pointed item like the end point of a

...continues to blink. The tv will not go onat all.Bill at [email protected] on the front panel you may find a small hole with a button behind it, take a paper clip and push it, this may reset your ...