Mitsubishi WD-52525 52" Rear Projection HDTV "tv red light" Questions

...light red. No picture, sound, nothing. T.V. starts up and then within 10-15 seconds the lamp indicator light turns red again. Any help would be greatly appreciated. you have mention that after 10-15 ...

...tv. It starts up then shuts down and give's me the red light two or three times in a row before it starts up and stays on. I'am afraid some day it just will not start up. I have had the tv for three ...

...red lamp light co tv will not power on steady red light stays on Inspect the lamp first to see if shattered--set has a self check feature also: Mitsubishi TV troubleshooting Here's something that ...

...tv WD-73640 wont turn on. 4 red light then 8 yellow lights just have blinking lights. 4 red then 8 yellow Hi, if you power your TV on and see a black or grey screen, it may be on the incorrect input. ...

...tv will turn off and the red light will stay lit. you can reset the tv to factory default settings , but before that I need more info ab manufacture date and purchase date you can find the first one ...

...red light. If I reset the tv it will power on run for a minute or so then go back to the red light. This is after I changed the light bulb and the and tv worked for 2 days then I got the same

red lamp light turns on and tv shuts off. The reason I know the lamp stays lit for approx. 5 seconds is I removed the lamp cover and defaulted the cover sw. so I could see what was going on. Any ideas

...tv went black red lamp light flashed then tv shut down. pulled the bulb appears to be fine. put bulb back in tv turned it on green light came on but still no picture then red light kicks back on and ...

red light after replacing both lamp and ballast. Replaced lamp first tv worked for a few minutes then picture deteriorates finally shutting down. Replaced ballast and tv is still doing the same thing.

TV cut off & a red light came on. I turned the tv back on & I get sound, just no picture...then the TV cuts off again & the red light comes back on. unplug it from the wall, wait 30 seconds, then plug