Mitsubishi WD-52525 52" Rear Projection HDTV "flashing light status yellow" Questions

Solid yellow lamp light AND flashing yellow status light TV won't turn on and has both a solid yellow lamp light and a flashing yellow status light. Diagnosis anyone? start with the lamp.

flashing status light I have a Mitsubishi WD-52525, the status light continuously flashes yellow and the tv will not power on. Any ideas? Wow I may have just fixed the flashy yellow status light ...

...status light blinks yellow. I hold the power button for 10 seconds and the yellow status stops flashes and turns green for a second. I hear a click from the back of the set and then the status light ...

...Light flashing yellow after replacing the bulb our bulb burned out in the WD-62327 with no warning. Bulb was cracked. we have replaced the bulb and now the status light is flashing yellow and the TV ...

...light is still on and flashing. Is the status light yellow or red? If it is yellow, then check the dust filter cover. That cover might be off or not secure. If the status light is red and blinking, ...

...status light ? changed lamp plugged tv back in and yellow status light blinking no power ? Mitsubishi TV troubleshooting Here's something that might also be useful. After you turn on the set, and ...

...status light on mitsubishi wd-65733 tv when i turn on the tv the yellow status light comes on and the tv shuts off after 30 seconds. the manual says the tv is to hot. it had not been on for 2 days ...

...happens when pressing the power button. The light keeps flashing if plugged in. I cannot test for codes by holding for 5 seconds as there is no place to check the code problem due to no display.

...light. This may help: MODELS: WD-52627 / 52628 / 62627 / 62628 / 62827 / 62927 / 73727 / 73827 / 73927 Page 43 3. Error Code Operational Check Note: The TV must be in "Shut Down" and not have been ...

...light flashing and according to the book it is because the filter door is open or loose. I don't think I can get it any tighter and the filter is clean. Diagnostics on the error list gives me 56. Any ...