Question about Canon PIXMA Office Equipment & Supplies
light and continues to to so. It will not stay solid green. Hello try 1. Turn off printer 2. Hold down Resume button and press Power button. 3. Keep holding down Power button and let Resume button go.
light any idea? Answer Part 1 of 2 An error has occurred in the printer. The number of flashes indicates the type of error, as outlined below. Check the cause and take appropriate action. Two flashes:
Question about Canon PIXMA Office Equipment & Supplies
...flashing green and yellow lights review this to determine your problem.. If all else fails simply unplug your printer wait a minute and plug back in. Handling Error Messages When a printer error ...
Question about Canon PIXMA Office Equipment & Supplies
Light Turn Green in the moments after the power button is on tap. 4. Remove the Resume Button but the power button still in a state of hold 5. Press and hold the power button, and the press the resume
...light source preventing correct print head alignment. Press the RESUME button to resolve the error. Align the printer so the paper output slot will not be exposed directly to a strong light source. ...
Question about Canon PIXMA Office Equipment & Supplies
...light is flashing 7 times and I get msgs that say cartridge not installed properly and cartridge cannot be recognized. I have refilled my cartridges more than once it worked fine for awhile. This is ...
light flashes eight times. what will i do? Before doing Resett ,Printer must be Ready (Service mode) , How to service mode; Turn off Printer ( POWER + USB cable attached). Press and hold RESUME button
Question about Canon PIXMA Office Equipment & Supplies
light source (Press the resume /cancel button and move the printer to a darker location and try to align the print head again. * check to make sure the lock lever is correctly positioned (down) If the
Question about Canon PIXMA Office Equipment & Supplies
light source (Press the resume /cancel button and move the printer to a darker location and try to align the print head again. * check to make sure the lock lever is correctly positioned (down) If the
536 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions