LG WM2701HV Washer "washing machine power button" Questions

...washing machine I have a LG washing machine model WM2277HW, The machine is just out of warranty. The problem is that it is not responding to the start button. The last load done must have kicked the ...

...hand, the machine will power up, just as if I pushed the power button. It will then wash your load without problem, but I really would like to have the power button work. Only had it two years so

...washing machine has power but no light display and doesn't work. I washed a bathrug and when I returned the machine had power (makes a tone when the on button is pushed), but none of the controls ...

...the appropriate connection. Use a stiff brush and water to clean. Reset the machine by disconnecting power, press start/pause button(blue button on right) for at least five seconds, reconnect

...machine. Now, if you are successful washing with the lowest spin speed, you can hold the " Spin Speed " button in while pressing on the power button. Release power button. Now release the spin speed ...

...washing machine for hours at a time just to do a simple wash. Is anyone familiar with this fault and can advise how to fix it. Sounds like the dial timer is defective, I am not affiliated with this ...

...WASH button for 3 seconds to lock/unlock control. When child lock is set, CHILD LOCK lights and all buttons are disabled except the Power button. You can lock the controls of the wash while

...washing machine.We tired checking the connections, turn off and on the mains power but still there is no response. Help! It sounds like the control board has an issue and needs to be addressed by a ...

...button for extra functions . Machine has true balance feature, stream and inverter direct drive. To activate or de-activate the child lock feature, press and hold the Child Lock button for three ...

...washing machine stopeed IE as error code due to no water.Then immediately i powered off the machine and immediately switched on ,then my display gives error code as "CL". here after i am not able to ...