...door switch and pwb assembly(Check the wiring hraness that is linking the door switch mechinsm to the PWB(main control) Door switch assembly is out of order Gasket on door may be creased in. If ...
...start the cycle? If No:Check the DOOR SWITCH ASSEMBLY Connector and MAIN PWB ASSEMBLY (Red 4 pin and white 4 pin connector (1)). Is DOOR SWITCH ASSEMBLY broken?If Yes:Replace the DOOR SWITCH ...
...door switch is not activated. Try to press the door firmly. If the error does not go then you will have to check the door latch, notch ( a protruding part which goes inside to latch & activate ...
...lock, door hook and switch as this will give the error code above, the switch can be checked with a multimeter for condition. You might need to replace the door hook or the internally mounted
...door switch and pwb assembly. * Door switch assembly is out of order * Gasket on door may be creased in Ok. You have stated that the unit is attempting to lock the door, but it is not locking. There ...
Question about LG WM Washing Machines
door switch, control panel or??? If the door switch contacts have burnt out then the switch will never work and neither will the machine until the switch is replaced. If the door switch button is worn
...door glass where it meets the gasket and, install washer inside under each door switch mounting screw to bring switch "in" slightly. door gasket outer metal spring will need to be removed to do
Question about LG WM Washing Machines
...the door actuator may be defective. if ur model has one? other wise sounds like the board is not communicating with the switch by pass the door switch like this: The door switch is faulty for
...door switch. Simply take off the metal ring around the seal, (there should be a spring on the bottom) then pull back the seal/ gasket where the door connects to reveal the the start switch. From the ...
45 questions posted
Usually answered in minutes!
1,845 Questions
401 Questions
243 Questions
245 Questions
234 Questions