GE 24 in. GSD5930 Built-in Dishwasher "normal wash light" Questions

normal wash light blinking, d/w wont start kenmore ultra wash dishwasher model 665.16034401 serial fs0803045 , the normal wash light blinking,and dishwasher wont start Wish I could solve this, as I'm ...

...normal wash and quick wash to light and work? HELLO THERE The cycle doesn't advance or you are unable to use one of the cycles such as light or the normal wash cycle, your problem normally is caused ...

...Normal Wash Heated Dry Normal Wash Heated Dry Normal Wash After that ? all the lights are lit up as follows: Smart Wash, Pots Pans, Normal Wash, China Gentle, Turbo Zone, Hi Temp Wash, Sani Rinse, ...

Normal wash flashing Red the Normal wash light is flashing Red continuously. I have tried pressing combinations of ... without much help. Sometimes I can get the dishwasher to startup, but it starts ...

...normal wash green light is on heated dry light is on and the start resume light is flashing but wont startup helpppp on the control panel the normal wash cycle green light is on and the heated dry ...

...normal wash press heated dry again press normal wash again wait a few seconds all the lights should come on press cancel (should hear pump) hit cancel again Started a cycle and began washing.....Thx ...

...Normal-Wash, Heat Dry, Normal-Wash, Heat Dry,Normal Wash, Heat Dry, Normal Wash, Heat Dry Then all the bottons light up Don't press anything wait a few minutes and it will work again I know because ...

...normal wash the no heat dry light turns on with the normal wash light, then the no heat dry light alternates with the lock on light. From there nothing works until I hit cancel button. Well, I could ...

...Normal-Wash button, several times in a row. that is... Push Heated-Dry, then Normal-Wash, Then Heated-Dry, then Normal-Wash... Repeat until all lights light up. When all lights light up you can stop. ...

...Normal Wash is pushed, also heat dry - but when start is pushed all three lights (Normal wash, heat dry and washing) blink then go out and nothing happens. This occurred after a 2 hour delay was ...