Green light flashes on kenmore dishwasher and it wont run. How do I fix this?
I actually had to change the steps a little and this is what I did:
press heated dry
press normal wash
press heated dry again
press normal wash again
wait a few seconds
all the lights should come on
press cancel (should hear pump)
hit cancel again
Started a cycle and began washing.....Thx
i was scared that my dishwasher was shot but this was a quick fix. This website is awesome!
I bought a baby swing at a thrift store and then turned here for a fix to make it work. For a total of $20 I have a swing that cost over $100 that works great. I find my self turning here again and again ! Thank you so much.
×
Press normal wash
press heated dry
press normal wash again
press heated dry again
wait a few seconds
all the lights should come on
press cancel (should hear pump)
hit cancel again
hope this will help ya out
You may just need to reset your control board. Go to the link and it
will explain how to reset the control board as well as explain what
might cause the issue and how to fix it.
http://www.appliancerepairlesson.com/dishwasher-2/dishwasher-clean-light-blinking-7-times/
Good Luck
http://www.appliancerepairlesson.com
4,435 views
Usually answered in minutes!
this the same problem I am having The only the only thing i have noticed is the heating element is broke. So i will replace this if this will fix the problem but i don,t want to spend the money if the dishwasher is junk or if the electronics are fried.
yes I had same problem, blinking green lights on Kenmore Ultra Wash - QuietGuard 4.
These steps fixed it no problem.
Thanks!
Thanks Bob Kelly this worked like a charm and you made me look like the HERO to my wife. YOUR THE MAN.
×