GE GSS20IEP Side by Side Refrigerator "plunger ice makers" Questions

plunger that drives the ice cube discharge tray up and down. If that center plunger oring has failed the ice maker will leak in a drip drip drip fashion. If it only leaks once every cube cycle then it

...common wire, one powers the light (door open / plunger extended) and the other one powers the ice maker (door closed / plunger depressed) Don't buy a controller yet!!!! Thanks for choosing FixYa. ...

...plunger depressed C to NC. It must read continuity for the ice maker and water dispenser to work. This manual will help you: http://applianceassistant.com/pdf/inDoorIceSystem.pdf Just note the door ...

...ice is selected and watch the plunger it should move up ward when you try and get ice. if it dooes not move it needs to be replaced if it does move jjust make sure the bail arm is properly inserted ...

...and ice maker both get water from the same pump. Water despenser is activated by a small plunger when you press your water glass against it to release the water. This is your problem, bad

...ice cubes, there is a plunger that lifts the rod and produces the combination that only allows ice cubes to come out. I would first check the plunger behind the panel and see if it is free.If it is ...

...PLUNGER THAT OPENS THE FLAP THAT LET ICE CUBES FALL OUT. REMOVE ICE MAKER AND THER ARE 2 5/16 SCREWS THAT HOLD PANEL IN THEN UN PLUG MOTOR AND USE HAIR DRYER & DEFROST MOTOR AND SOLENOID SHOULD WORK ...

...plunger in the ice dispenser shoot on the door - the ice maker is frosting up (inside) and the ice it is forming is making the dispenser only dispense crushed ice. When I defrost the area - it will ...

...causing frost to build up around the hold the gear that pulls it closed is bad. some have small plungers instead of ...

plunger is depressed. Ligt stays on = bad door switch / no ice production as the door switch provides power to the ice-maker when the door is closed. Here is a link to the steps on how to troubleshoot