LINK HANDSET shows in the display. 2NO is the default setting. 2. Press the 1 number key or press the MESSAGES/CID (or) button on the base to scroll to 1YES. 3. Press flash/program to confirm handset
handset If “No link to base. Move closer to base, try again.” is displayed even when the handset is near the base unit, you may need to re-register the handset to the base unit. Important:
...link to the base..I purchased the phones at Target on 11/23/2008.. Buddy King Texarkana, TExas Registering a unit Operating additional handsets Additional handsets Up to 6 handsets can be registered ...
...link. As long as the handset maintains a charge, the identification remains valid. If you remove the battery or drain the handset to a point where the handset ID is lost, then you may have to ...
...link to base. Move closer to base, try again.” is displayed even when using the handset near the base unit, the handset may have lost communication with the base unit. You need to re-register the ...
...link to the base. 1. The handset has lost communication with the base unit.Move closer to the base unit, and try again. 2. Confirm that the base unitâ??s AC adaptor is plugged in. 3. Raise the ...
Question about Xact Communication Lands Phones
Handset ?No Link To Base? error and no dial tone Hi, I have a GE 26936GE1-C 32-channel 900mhz call waiting ID and speakerphone cordless telephone. When I press the ?talk? button on my handset, it ...
...link codes the handset to the base with a unique security code so others with the same phone cannot use your phone line. If you changed the battery, try disconnecting the base telephone line and ac ...
41 questions posted
Usually answered in minutes!
1,197 Questions
619 Questions
465 Questions
463 Questions
293 Questions