...used for the pool. Check your high limit switch inside of the heater. Usually when the high limit switch pops it will take about 4 to 6 hours for it to reset itself without you resetting the
pool heater Model RP2100.On the back of control board shows overtemp fail. What is the remove and replace procedure for this component? Thank you, Ken this usually indicates a high limit condition.you
...pool heater goes through the startup sequence but shuts down shortly after fuel gas is introduced This could be a number of things, high limit switch, temp sensor or clogged burners. If the heater ...
...pool heater, there is gas coming into the valve unit but it will not pass the valve block to light the pilot light. Disconnect the pilot tube from the valve and pass a thin wire through it to make ...
High Limit Swtiich message I am getting a high limit switch message and the heater is not operating. Was working 2 days ago, nothing has happen to the system that should have changed anything. What ...
...high limit on top of the manifold outlet opens. (Labeled for 135 degrees F) Then high limit then closes and with the auto reset heater kicks back in again in 2 minutes. This cycle continues until it ...
421 questions posted
Usually answered in minutes!
104 Questions
92 Questions