Question about Kenmore HE2 Washing Machines
...washing machine leak at the soap dispenser regi my he2 front loader must be clogged. water leaks out from the soap dispenser and when we did a test, the water drained very slowly into the washer. any ...
Question about Samsung Washing Machines
...washing machine drum if its leaning to one side the inner drum is leaning to the side and when it tries to spin during the wash or the spin cycle, it writes ED inner and outer have to come out to ...
...washing machine you have. 1. Unplug the washer from the mains. 2.Turn water supplies off to the machine. 3.Open the door put your hand on the bottom of the drum inside the washer, lean a bit of your ...
...mechanism inside the washing machine has broken. You will need to open your Washing machine and inspect the Drum Support, and the balance mechanism. Hook it back up or replace it if it is
washing machine drum banging on spin cyle Sometimes the drum may unhook or break one of it's hangers. This will cause the tub to lean.. When spin cycle comes on the weight of the wash load will shift ...
...washing machine. The drum, now, wants to lean more towards the front of the machine. And, on just the spin cycle only, it bangs and thrashes around now. There are two or three springs that hold the ...
Question about Fisher Washing Machines
drum leaning towards the right. The machine just stopped mid cycle and I can see the drum is off balance, leaning towards the bottom right. It looks like the red spring is still attached, the legs are
drum leans to one side when washing and spinning You most likely have a weak spring or worn spring mount. If the tub is not hitting the sides of the washer then you will be fine running it like that. ...
Question about Washing Machines
...drum inside feels loose and is leaning forward making it scrape on whatever is underneath. how do i stop the drum doing this? If the inner drum is loose the bearing may have failed or the drum shaft ...
washing machine leaks from above door below soap dispenser Check to make sure the washer is level and not leaning forward. If it is leaning forward as the dispenser fills it can sometimes force the ...
2,986 questions posted
Usually answered in minutes!
11 Questions
12 Questions