Canon PIXMA MP980 All-In-One InkJet Printer "print blank second" Questions

...print on the first...the second paper is blank...the third sheet has the rest of the print. Or when it grabs two...the top is on the first and the rest on the second sheet. try one sheet at a time ...

...print and the alarm light is flashing. Can you help? Thanks maree You could try resetting the printer: 1) On the panel, press and hold the button until the display goes blank (approx. 1 second). If ...

...The machine sounded like it was printing in the head cleaning process , but the paper came out blank. help steve try to see if are nozzles of cartridge or print head dirty and check the purge

...blank. (If this does not happen, unplug the printer). 2) Wait approx. 10 seconds 3) Plug in the device - Press if necessary to power on the printer 4) Wait until the device has finished its startup ...

...blank). If this does not power off the printer, you may need to unplug the power cord. 2) Wait approx. ten seconds, press button 3) Wait until the device completes its startup process before sending ...

...print cartridges. 3. Clean the copper-colored contact points on the cartridges with a damp, lint-free cloth. Use a dry, lint-free cloth to remove moisture from the contacts. 5. Insert the cartridges ...

...second. (The display will go blank.) Note: It may be necessary to unplug the power cord if pressing the ON/OFF button does not shut off the printer. Wait approximately ten seconds and then press the ...

blank piece of A4 fast, followed by another one, slowly When I send a print job to my iP4200, it feeds one sheet through quickly follwed by a second sheet, slowly. Both are blank. No error message but

...blank). If this does not power off the printer, you may need to unplug the power cord. 2) Wait approx. ten seconds, press button 3) Wait until the device completes its startup process before sending ...

...blank when i try to print, the paper runs through the cycle, but it comes out blank. the ink tanks are full. Ok here is the code you need. The waste ink are in the inside of your printer you need to ...