Can't remove the wheel from a 2006 town and country

Front and back. If the back one goes out, the transmission needs to be removed.

https://www.google.com/search?q=2006+Chrysler+Town+and+country+Freeze+plugs

https://www.chryslerforum.com/forum/chrysler-voyager-town-country-21/freeze-plug-replacement-2248/

..

change front wheel bearing on 2009 Chrysler Town Country YouTube

just remove tire and tap drum with hammer should come off ....important take a photo of how this thing goes together.....or doomed

Loosen tire lug nuts. Jack up the car and remove lug nuts and tire. Remove two bolts holding the caliper in place. Remove the the two bolts holding pads in place. Hang caliper with a wire from wheel so brake line is not stressed. Mount new calipers in correctly and tigthen pad bolts. Put caliper on and tighten caliper bolts. Replace tire and lugs nuts. Jack car down and tigheten lug nuts.

Maybe when you change the tires they remove or broke one or the four sensors located inside the rim or wheel, at the inside of the valve, this sensors transmit the low pressure to the computer, and if one, or all, are removed or damaged, computer will register it at as a low pressure tire

try to look for a fuse.

I replaced the brake pads on a '94 Chrysler town and country, I had the rotors turned also, I did not use any anti-vibration substance on the shoes. I hear a clicking noise from front brakes.

the sticker on the drivers door or door jamb will have that info. plus it is on the side of the tire, starting with P___-__-__

http://forum.chryslerminivan.net/printthread.php?t=113 visit yhis site it may help you